Medical office, dental, clinic, and healthcare facility construction. Built to code, built to compliance, and built around patients who never stop coming.
Healthcare projects carry requirements most contractors never touch: infection control protocols, specialized HVAC and air changes, medical gas, lead-lined rooms, ADA clearances, and construction phased around an operating practice. We build medical spaces that pass inspection and let providers keep seeing patients while the work happens.
Clinical and support spaces across the outpatient healthcare spectrum.
Most healthcare construction happens while the practice stays open. That means dust containment and negative air pressure at the work boundary, after-hours scheduling for disruptive scopes, protected patient pathways, and coordination with clinical staff so treatment schedules are never surprised by construction. Our FYZICAL Therapy & Balance Center project in Aurora ran this way — new treatment rooms, an ADA restroom rebuild, MEP scope, and slab repair, all inside an operating physical therapy clinic.
Healthcare spaces answer to more than the building department. Depending on the facility type, the build must satisfy ADA clearances and turning radii, infection control risk assessment (ICRA) protocols, ventilation and air-change requirements for clinical rooms, medical gas code, and the equipment manufacturer specs for everything from imaging to sterilization. We plan those requirements into the drawings and the schedule from day one, so the final inspection confirms what was built instead of discovering what was missed.
A typical Denver medical office build-out runs 3 to 6 months of construction after permits, with permitting and health-authority plan review adding lead time before that. We manage the full sequence: design coordination, permit applications, phasing plan for occupied suites, rough-in inspections, finishes, and equipment coordination with your vendors. You get a schedule tied to your lease obligations and patient commitments, and early warning if anything threatens it.
Medical office build-out costs in the Denver metro typically range from $120 to $200 per square foot, reflecting the specialized MEP, plumbing-heavy scope, and equipment coordination clinical spaces require. A basic exam-room suite with standard finishes lands at the lower end, while dense plumbing, medical gas, imaging shielding, or lab infrastructure can push costs above that range. Snyder provides a detailed budget before construction begins so the number is known up front.
Yes. Phased construction in occupied medical facilities is one of our core capabilities. We isolate work areas with dust containment, schedule disruptive work after hours, maintain protected patient pathways, and coordinate directly with clinical staff so patient care continues throughout construction.
A typical Denver medical office build-out takes 3 to 6 months of construction after permit approval. Permitting and plan review add lead time before that, and phased work in an occupied suite can extend the schedule compared to a vacant build-out. Snyder manages permitting, phasing, and inspections as part of the project.
Healthcare spaces carry requirements beyond standard commercial code: infection control protocols during construction, higher ventilation and air-change rates in clinical rooms, medical gas systems, ADA clearances for exam and treatment rooms, and coordination around medical equipment specifications. A contractor who has not built clinical space discovers these requirements at inspection; we plan them from day one.
Yes. We manage building, mechanical, electrical, and plumbing permits, plus any change-of-use review if the space was not previously medical. Where a health authority or specialized review applies, we coordinate the plan submission and inspections as part of our scope.